Installation of options in the IC-9100
by Adam Farson, VA7OJ/AB4OJ
Fig.1: Preparation for option installation.
![Fig.1: Preparation for option installation.](images/test/opt_prep.jpg) |
Fig.2: Roofing filters installed. (6 and 3 kHz filter modules
have different connectors.)
![Fig.2: Roofing filters installed. (6 and 3 kHz filter modules have different connectors.)](images/test/roof.jpg) |
Fig.3: IF board for UX-9100 installed. Note cable routing.
![Fig.3: IF board for UX-9100 installed. Note cable routing.](images/test/if_bd.jpg) |
Fig. 4: UX-9100 1.2 GHz module installed. Note fold of
UX-9100/IF board ribbon cable.
![Fig. 4: UX-9100 1.2 GHz module installed. Note fold of UX-9100/IF board ribbon cable.](images/test/ux9100_inst.jpg) |
Fig.5: Testing MDS at 1.24 GHz.
![Fig.5: Testing MDS at 1.24 GHz.](images/test/1240mhz.jpg) |
Copyright © 2011 A. Farson VA7OJ/AB4OJ. All rights reserved. Images contributors as noted.
Last updated: 09/25/2019